RE: Swiss AMOS - 737-800 MPD upload in XML format - File Transfer Failed Error.

Dear Paul,

Thank you for your response and yes I do understand that we are hitting a protection measure but how do I go about obtaining the license if required or access to be able to continue my process to load the Boeing MPD data into our system for processing?


Thank you
Yours sincerely
Laurie Bennie | MANAGER | Governance and Compliance

[cid:image001.jpg@01CFEED7.1BC9C0E0]Mobile: 083 419 1766 | [cid:image002.jpg@01CFEED7.1BC9C0E0] Phone: +2711-978-5088 | [cid:image003.jpg@01CFEED7.1BC9C0E0] Fax: +2711 978-2335 | [cid:image004.jpg@01CFEED7.1BC9C0E0] E-Mail: LaurieBennie@flysaa.com<mailto:LaurieBennie@flysaa.com>
Room 223C, Floor 2, Block C, Airways Park, OR Tambo International- Johannesburg- SOUTH AFRICA

From: Paul Libbrecht [mailto:paul@hoplahup.net]
Sent: 20 October 2014 11:47 PM
To: Laurie Bennie
Cc: www-math@w3.org
Subject: Re: Swiss AMOS - 737-800 MPD upload in XML format - File Transfer Failed Error.

Dear Laurie,

since you posted on a public list, I allow myself to answer.

I would suspect you are hitting the protection measures described in this blog entry:
            http://www.w3.org/2003/entities/2007/w3centities.ent
I understand they happen when traditional parsing pipelines crawl the whole DTD stacks even though most of the entries are already downloaded quite often and/or could be delivered with the software.

The blog entry gives some hints how to solve the issues.
Hope it helps.

paul


On 20 oct. 2014, at 15:25, Laurie Bennie <LaurieBennie@flysaa.com<mailto:LaurieBennie@flysaa.com>> wrote:



Dear David Carlisle,


Please note the communication between SAA and Boeing below.


SAA Technical would like to use the Boeing MPD in xml format to upload the data into the AMOS system to be able to produce Task cards.
We have been battling to upload the files provided via the Boeing onsite representative for the following reasons:
                1. SAA Proxy server did not allow the PC to access the link in the code "http://www.w3.org/Consortium/Legal/2002/copyright-software-20021231.html" and we have now allowed this access.
                2. The w3.org<http://w3.org/> then returns a "403 error" back to us (as per  below display)and we are unable to continue with the process in AMOS.


Please could you assist and advise what is still required from SAA side to be allowed to access the MPD in this format?


<image001.png>






Thank you
Yours sincerely
Laurie Bennie | MANAGER | Governance and Compliance


Mobile: 083 419 1766 | Phone: +2711-978-5088 | Fax: +2711 978-2335 | E-Mail: LaurieBennie@flysaa.com<mailto:LaurieBennie@flysaa.com>
Room 223C, Floor 2, Block C, Airways Park, OR Tambo International- Johannesburg- SOUTH AFRICA


-----Original Message-----
From: Boeing Customer Support [mailto:csd.boecom@boeing.com<http://boeing.com/>]
Sent: 17 October 2014 05:40 PM
Subject: RE: Swiss AMOS - 737-800 MPD upload in XML format - File Transfer Failed Error.


FROM: THE BOEING COMPANY
TO: South African Airways (SAA)
[MESSAGE NUMBER:SAA-SAA-14-0058-06B]      Boeing Response
MESSAGE DATE:  17 Oct 2014 0839 US PACIFIC TIME / 17  Oct 2014 1539 GMT


The following message is distributed to the following people at SAA Technical Proprietary LTD:
Christo Miller


The following message is distributed to the following people at South African Airways:
Ms. Laurie Bennie


Field Service Base:  BFSJNB


Service Category:  Digital Data Support   Model:  737       Series/Product:  XML            ATA:


SUBJECT: RE: Swiss AMOS - 737-800 MPD upload in XML format - File Transfer Failed Error.


REFERENCES:
/A/ SAA-SAA-14-0058-05C




DESCRIPTION:


Dear Jowene,


We have had the URL made available on our network but am now getting a response back from the server rejecting our request.
Is there a license that we are meant to have to be able to make use of this MPD Data in XML format?




Thank you
Yours sincerely
Laurie Bennie | MANAGER | Governance and Compliance


Mobile: 083 419 1766 | Phone: +2711-978-5088 | Fax: +2711 978-2335 | E-Mail: LaurieBennie@flysaa.com<mailto:LaurieBennie@flysaa.com> Room 223C, Floor 2, Block C, Airways Park, OR Tambo International- Johannesburg- SOUTH AFRICA




-----Original Message-----
From: Laurie Bennie
Sent: 15 October 2014 08:01 AM
To: 'Boeing Customer Support'
Cc: I-Memoli, Tony (tony.memoli@boeing.com<mailto:tony.memoli@boeing.com>); I-Botha, Pieter J (pieter.j.botha@boeing.com<mailto:pieter.j.botha@boeing.com>); Christo Miller; Viv Reddy
Subject: RE: Swiss AMOS - 737-800 MPD upload in XML format - File Transfer Failed Error.


Dear Jowene,


Thank you for this feedback I have tried the URL and get the message below which I will now have to follow up on:


Copyright 1998 - 2011 W3C.


     Use and distribution of this code are permitted under the terms of
     either of the following two licences:


     1) W3C Software Notice and License.
        http://www.w3.org/Consortium/Legal/2002/copyright-software-20021231..html




     2) The license used for the WHATWG HTML specification,
        which states, in full:
            You are granted a license to use, reproduce and create derivative
            works of this document.




     Please report any errors to David Carlisle
     via the public W3C list www-math@w3.org<mailto:www-math@w3.org>.




       Public identifier: -//W3C//ENTITIES Combined Set//EN//XML
       System identifier: http://www.w3.org/2003/entities/2007/w3centities.ent


     The public identifier should always be used verbatim.
     The system identifier may be changed to suit local requirements.


     Typical invocation:


       <!ENTITY % w3centities PUBLIC
         "-//W3C//ENTITIES Combined Set//EN//XML"
         "http://www<http://www/>....


RESPONSE AND/OR REQUIRED ACTION :








RESPONSE:


Dear Laurie,


The answer is "no, there is no license you need from Boeing in order to make use of the MPD XML". The access you were giving via MyBoeingFleet is all that is required.


You may want to talk with the AMOS folks to find out if there is a setting that is not allowing you upload the data.


Also, have you considered using the Excel data instead of the XML?


Best regards.


If attachments are referred to, and are not present, please access them by logging into MyBoeingFleet Service Requests application or contact your Boeing Field Service Representative.
https://myboeingfleet.boeing.com/servicerequests/index.html?entityId=4-19VYJJW&entityType=CommunicationMessage
Suppliers, please access attachments by logging into Boeing Partner Network Supplier Service Requests application.






Jowene Prouty-Black
Integrated Data Architecture and Test - Seattle Harium Martin-Morris - Manager


Disclaimer: The information in this e-mail is confidential and is legally privileged. It is intended solely for the addressee. If this e-mail is not intended for you, you cannot copy, distribute or disclose the included information to anyone and request that the mail be deleted. Any disclosure of confidential or privileged information transmitted herewith may result in legal proceedings being instituted against the recipient hereof. While all reasonable steps have been taken to ensure the accuracy and integrity of all data transmitted electronically, SAA does not accept liability if the data, for whatever reason, is corrupt or does not reach its intended destination. Please note that this e-mail and the contents thereof is subject to the standard SAA E-mail Disclaimer which may be found athttp://www.flysaa.com/za/en/policies_and_Disclaimers..action#Email .Should you not have access to the internet, send an e-mail to requestdisclaimer@flysaa.com<mailto:requestdisclaimer@flysaa.com>and a copy will be sent to you.
<114102015253200406.png>

SOC Ltd Reg. No. 1997/022444/30

Disclaimer: The information in this e-mail is confidential and is legally privileged. It is intended solely for the addressee. If this e-mail is not intended for you, you cannot copy, distribute or disclose the included information to anyone and request that the mail be deleted. Any disclosure of confidential or privileged information transmitted herewith may result in legal proceedings being instituted against the recipient hereof. While all reasonable steps have been taken to ensure the accuracy and integrity of all data transmitted electronically, SAA does not accept liability if the data, for whatever reason, is corrupt or does not reach its intended destination. Please note that this e-mail and the contents thereof is subject to the standard SAA E-mail Disclaimer which may be found at http://www.flysaa.com/za/en/policies_and_Disclaimers.action#Email .Should you not have access to the internet, send an e-mail to requestdisclaimer@flysaa.com and a copy will be sent to you.