Re: FW: Coverage subgroup - document for discussion

I would point out that this topic, and this thread, exhibit a wide range of
overlapping concerns, that would lead a new user to the field to a
difficult challenge in how to address whcihever of these concerns they
face. That, in a nutshell, is why we need a BP IMHO.,

Looking at the SDW charter we see:
"The Recommendation will include provision for describing the subset of
coverages that are simple timeseries datasets - where a time-varying
property is measured at a fixed location. OGC's WaterML
<http://www.opengeospatial.org/standards/waterml> 2 Part 1 - Timeseries
will be used as an initial basis.

Given that coverage data can often be extremely large in size, publication
of the individual data points as Linked Data may not always be appropriate.
The Recommendation will include provision for describing an entire coverage
dataset and subsets thereof published in more compact formats using Linked
Data. For example where a third party wishes to annotate a subset of a
large coverage dataset or a data provider wishes to publish a large
coverage dataset in smaller subsets to support convenient reuse."

In particular I would not limit the concept of spatial to coordinate
geometry. IMHO need BP that allow us to describe coordinates, tesselations
and other forms of grids with hierarchies, and hierarchies of nested
features.  I would look for a BP that allowed the class of dimension to be
easily recognised when defining the specific dimension of  a specific
datacube, and the domain and range of the dimension to be easily accessed -
i,e, definitions and values. I would also be hoping that there was a model
that sould allow description of transformations between these, but I'd be
happy merely for the mechanism for doing this to be identified.  Such a BP
would allow me to characterise a s set of resources in a useful way, and
start to work on the next steps.

The same applies to the time dimension, and the sensor.

Each is complex, but some basic patterns for common cases would help, and
provide the potential for future extension to describe how to process those
dimensions.

The characterisation of relationships between
slices/dices/branes/queries/traversals/derivations etc is also very
complex. My own predilection here would be to get the basics of QB
dimension description done, and then provide some informative examples of
how these may then be used in the context of formally describing a subset.
A future BP effort could then be applied to sorting out all the patterns.

SDMX is not the only possible scope, but at least we know there are a set
of use cases it does handle. And as Kerry points out, there are things we
need that it doesnt handle (yet). We know these extensions are complicated
enough a BP is required.

Each BP pattern would have a limited scope and an example of how it could
applied in a specific circumstance, and a recomendation for further BP
scope.

We could prioritise these requirements in different ways:
1) identifying dependencies - e.g. you can't do slices on geography without
having a pattern for the type of geography (slices on coordinates are
different to slices on some tesselation are different to slices on feature
geographies). You prioritise from the top of the tree down until you can
offer something useful
2) vote (which probably means taking your favourite end-use case and waling
back up the dependency tree if one is smart )
3) see who works on what and argue about the overlaps.
4) plans D, E, etc

My vote would be:
1) characterise the main types of spatial dimension in coverages and state
what is in scope and what is out of scope for BP
2) create abstract classes for the in-scope types (on ontology module) and
accept or reject RDF-QB as a basis for this
3) ditto for time
4) ask SSN group to review patterns and propose scope for sensors (scope
may be "no BP recommended" or "future work on BP recommended")
5) characterise the main types of spatial and temporal dimension subsetting and
state what is in scope and what is out of scope for BP
6) create abstract classes for the in-scope subsetting types (as ontology
module), based on the abstract dimensions and accept or reject RDF-QB as a
basis for this
7) develop informative examples of how these ontologies may be used to
create links and provide enhanced context for accessing services via more
complex protocols

The JSON and RDF data encoding work could then use the vocabularies defined
in these ontologies to improve the consistency self-description.

rob





On Thu, 19 May 2016 at 02:48 Kerry Taylor <kerry.taylor@anu.edu.au> wrote:

>
>
> *From:* Kerry Taylor
> *Sent:* Thursday, 19 May 2016 12:50 AM
> *To:* 'Little, Chris' <chris.little@metoffice.gov.uk>
> *Subject:* RE: Coverage subgroup - document for discussion
>
>
>
> Chris,
>
> I think what you want *was* in the datacube model in an early draft --- a
> “subslice” but did not make it through to the final version.  I used it in
> a climate data project. However, relying on the beautiful W3C processes –
> you might be able to understand the why from here
> https://www.w3.org/2011/gld/track/issues/34. I think we need something
> like this for the coverage deliverable if we do go ahead with a qb model.
>
>
>
> As I get it, the main reason for dropping it is that it is not defined in
> SDMX (the stats agency standard) and also (Dave Reynolds)
>
> > The use case you mention is perfectly reasonable, but it can be
> addressed by a property in an extension namespace, and can be easily
> re-added in a future version.
>
>
>
> So maybe that is something we should do? It makes sense to me.  Surely it
> can be used to define appropriately granular “extracts” even outside the
> original data publication. Does this do what you want? I’m not well enough
> aware of the relevant WCS2.0 capability.
>
>
>
> --Kerry
>
> *From:* Little, Chris [mailto:chris.little@metoffice.gov.uk
> <chris.little@metoffice.gov.uk>]
> *Sent:* Wednesday, 18 May 2016 11:49 PM
> *To:* Rob Atkinson <rob@metalinkage.com.au>; Bill Roberts <bill@swirrl.com>;
> Jon Blower <j.d.blower@reading.ac.uk>
> *Cc:* public-sdw-wg@w3.org; Roger Brackin <roger.brackin@envitia.com>
> *Subject:* RE: Coverage subgroup - document for discussion
>
>
>
> Hi Rob,
>
>
>
> This is a bit of a diversion and probably does not help finish this SDW WG
>  topic, but is a direction I want to go:
>
>
>
> The QB model of dimensions and slices stops short of what is in OGC WCS2.0
> – where any slice can be trimmed (a form of sub-setting) to a bounding box
> aligned with the dimension axes. So far, so what.
>
>
>
> I am interested in the wholesale tiling of a data cube, as a one-off
> process, to enable a wider range of sub-setting and supporting scalability
> and reuse (if each tile given a persistent enough id). This is not really
> anything new, and some would argue is only an implementation detail. I am
> still interested. The tiles may not contain just single values from a
> simple scalar data cube, but may contain point clouds, vector geometry or
> other stuff – whatever the contents of the original data cube were.
>
>
>
> There are a variety of applicable uses cases, such as archive granule
> retrieval, data dissemination to a very large number of low powered
> devices, boundary conditions for a large number of local weather prediction
> models.
>
>
>
> Whether the tiles are treated as a single multi-dimensional coverage or a
> collection of a large number of lower dimensional coverages, I do not mind,
> but it seems to me that this a simple and straightforward addition to the
> QB model.
>
>
>
> Is it?
>
>
>
> Chris
>
> *From:* Rob Atkinson [mailto:rob@metalinkage.com.au
> <rob@metalinkage.com.au>]
> *Sent:* Wednesday, May 18, 2016 1:50 PM
> *To:* Bill Roberts; Jon Blower
> *Cc:* public-sdw-wg@w3.org
> *Subject:* Re: Coverage subgroup - document for discussion
>
>
>
> Hi,
>
> I've put some detail on the page
> https://www.w3.org/2015/spatial/wiki/Data_cube_for_coverage to identity
> different possible directions for this aspect.
>
>
>
> FYI My project with OGC is concerned with UC1 and UC2, which seems
> complementary to the other activites supporting this thread.
>
>
>
> Cheers
>
> Rob Atkinson
>
>
>
>
>
> On Wed, 18 May 2016 at 20:45 Bill Roberts <bill@swirrl.com> wrote:
>
> Thanks Jon, that's a useful perspective.  Certainly we talk about making
> discovery and retrieval of the data easier, working nicely with web-based
> technology etc - so we need to be clear about 'easier for whom'.
> Inevitably different people will want different things so we will have to
> be explicit about our priorities.
>
>
>
> The existing use cases cover quite a few of the scenarios you have
> sketched out, but they don't yet link those to these kind of user
> personas.  That might be worth doing - it probably wouldn't take long.
>
>
>
>
>
>
>
>
>
>
>
> On 18 May 2016 at 11:35, Jon Blower <j.d.blower@reading.ac.uk> wrote:
>
> Hi Bill, all,
>
>
>
> Just some initial thoughts in advance of our telecon. There is lots of
> good stuff in here, and it’s all relevant to the general area of
> “Coverages”. Some of these issues are of course very complex and I don’t
> think we’ll solve them all – and in fact this group might not be the best
> place to do so.
>
>
>
> I wonder if it would help to structure the document and our thinking
> around the different audiences we might aim at. For example:
>
>
>
>  * A “web developer” might need some explanation of what a coverage is
> (“dummies’ guide”). He/she would probably like a simple API to access them,
> and some simple formats with which he/she is familiar. The applications are
> likely to be reasonable simple and visualisation-oriented, rather than
> “deep” analysis.
>
>
>
>  * A “spatial data publisher” might already be familiar with the
> terminology, but might want to know how to make his/her data more
> discoverable by mass-market search engines, or how best to make use of
> Linked Data and semantic stuff. He/she is probably going to be keen to
> describe coverage data very precisely (e.g. using the “right” CRS and
> full-res geometries), but is also interested in the cost/benefit tradeoff.
>
>
>
>  * A “data analyst/scientist” might be interested in quality and
> uncertainty, and how to bring coverage data into his/her tools (e.g. GIS,
> Python scripts). This kind of person may just want to download the data
> files in an unmodified form, although data-extraction services can be
> useful in some circumstances (and hosted processing is increasingly
> popular).
>
>
>
>  * An “environmental consultant” may have very limited time to perform
> some kind of analysis to form part of a report. If a dataset is hard to
> find, access or understand it will probably simply be omitted from the
> analysis. Often interested in a very specific geographic area. Needs to
> quickly establish that a dataset is trustworthy,
>
>
>
>  * An “IT provider” might be interested in scalable and maintainable web
> services for high-volume data that can be made part of his/her
> organisation’s operational procedures. He/she probably has a low tolerance
> for high-complexity or “bleeding edge” technology.
>
>
>
> This is just off the top of my head, and there are certainly more, and
> there will also be lots of overlap. And I’m sure there’s lots to argue
> about there. But this helps me, at least, put some structure on the Big
> List. For each of these kinds of user, what would be the most useful thing
> that we could do to help them (maybe a new technology, or a recommendation
> to use something existing, or an admission that the problem remains
> unsolved), in the context of this group?
>
>
>
> (Am I just reinventing the Use Cases here, or is this still useful for the
> Coverage requirements?)
>
>
>
> Cheers,
>
> Jon
>
>
>
>
>
>
>
> *From: *Bill Roberts <bill@swirrl.com>
> *Date: *Tuesday, 17 May 2016 23:44
> *To: *"public-sdw-wg@w3.org" <public-sdw-wg@w3.org>
> *Subject: *Coverage subgroup - document for discussion
> *Resent-From: *<public-sdw-wg@w3.org>
> *Resent-Date: *Tuesday, 17 May 2016 23:44
>
>
>
> Hi all
>
>
>
> I've made some initial notes on requirements in this wiki page:
>
>
>
> https://www.w3.org/2015/spatial/wiki/Coverage_draft_requirements
>
>
>
> I'd like to go through this on the call tomorrow (we probably won't get
> all the way through it as there is quite a lot there).  If you are joining
> the call it would be great if you could look at it in advance.
>
>
>
> Comments also welcome via this mailing list.
>
>
>
> Cheers
>
>
>
> Bill
>
>
>
>
>
>
>
>