W3C home > Mailing lists > Public > public-sdw-wg@w3.org > July 2015

Re: [SDWWG] CRS Issues, Issue-28

From: Kerry Taylor <Kerry.Taylor@acm.org>
Date: Tue, 21 Jul 2015 21:47:50 +1000
Message-Id: <9183B9D2-618A-43D7-ADF2-FB7E405DA4DF@acm.org>
Cc: "Heaven, Rachel E." <reh@bgs.ac.uk>, SDW WG Public List <public-sdw-wg@w3.org>, Kerry Taylor <Kerry.Taylor@acm.org>, "Svensson, Lars" <L.Svensson@dnb.de>, Peter Baumann <p.baumann@jacobs-university.de>
To: Frans Knibbe <frans.knibbe@geodan.nl>
This is very very similar to what I was suggesting for the simplest case. The only difference is that in my proposal "very simple CRS" itself would have a namespace and a URL, and that namespace would be used to identify the "crs" even if that "crs" is,say,"crsfordummies", but it is not a default because it is well identified by its namespace every time it is used.  And every other namespace, say "the-crs-i-made-up" is equally well identified. They do not necessarily need to be well described ( doubtless the professionals will make sure they are)but they do need to be well identified.

Whether the more professional crs are specialisations or not is an ontology design question, and need not concern us for the purposes of determining whether or not we require a crs to be mandatory. I think it should be mandatory, because there is no complexity cost to doing so, and plenty of advantages as identified by others.

Kerry


> On 21 Jul 2015, at 1:26 am, Frans Knibbe <frans.knibbe@geodan.nl> wrote:
> 
> Hello,
> 
> Not about the phrasing of the default CRS requirement, but a thought on what a solution might look like:
> 
> Would it help if there was a vocabulary that defines a very simple CRS, composed of latitude, longitude and elevation, without any reference to datums and such? Such definitions of longitude and latitude would be even more simple than the corresponding properties in the basic geo vocabulary, because that vocabulary assumes WGS84.
> 
> Perhaps then longitudes and latitudes with WGS84 or ETRS89 or whatever datums could be seen as specialisations of the general concept of longitude and latitude. I think that in many current publications of (point) geometries that is exactly what is happening: there is a longitude and a latitude, but there is no idea of which specific geodetic CRS they are related to. It's just longitude and latitude. Probably that is also the way historic locations from before the age of geodesy should be handled. Longtitude and latitude were recorded before geodetic datums were invented. 
> 
> And perhaps such a simple set of definitions could also function well as a default CRS.
> 
> A logical consequence would be that there is a limit to the accuracy of the lon/lat numbers. For high precision coordinates one should make use of a more fully specified CRS (WGS84, ETRS89 or even a dynamic CRS). But still coordinates that are just longitude and latitude are useful for various purposes and could be made to be interoperable with more thoroughly defined geometries. 
> 
> Regards,
> Frans 
> 
> 2015-07-08 12:48 GMT+02:00 Heaven, Rachel E. <reh@bgs.ac.uk>:
>> I agree with Kerry, Lars, Peter below.
>> 
>>  
>> 
>> I think allowing publishers to use an implied default CRS would lead to many misunderstandings for consumers (for data that pre-dates or doesn’t follow the best practice, or when WGS2024 or whatever comes along..), and we should aim to have publishers make the CRS explicit in the data or metadata.
>> 
>>  
>> 
>> To help consumers handle the cases where the CRS is not explicit, perhaps the requirement should be to provide guidance on which CRS to assume, and suggested methods to validate that assumption. In many cases the assumption could be WGS84 but this will depend on the data source, context, accuracy required etc.
>> 
>>  
>> 
>> (As another example of WGS84 not being safe to assume as the default: the working CRS for the UK offshore petroleum industry is ED50 east of and including 6 deg W ED50, and ETRF89 to the west of that line – the wonderfully named Thunderer Line. For consistency the industry uses an agreed set of transformations between ED50, ETRF89, OSGB36 and WGS84.  100s metres positional error in using the wrong CRS can be costly...)
>> 
>>  
>> 
>> Rachel
>> 
>>  
>> 
>>  
>> 
>> From: Kerry Taylor [mailto:Kerry.Taylor@acm.org] 
>> Sent: 03 July 2015 14:49
>> To: SDW WG Public List
>> Subject: Re: [SDWWG] CRS Issues, Issue-28
>> 
>>  
>> 
>> I agree with Lars and Peter!  The notion of default is highly contextually dependent -- someone's sensible default is another's nightmare.
>> 
>>  
>> 
>> It seems to me that we are expecting ( at least where there is a geometry) spatial locations to to be described according to a vocabulary. Yes? Then all we need to do is to reuse the vocabulary namespace  ( which of course is also an http URI) as the identifier for a CRS.  This is just what the geo wgs84  http://www.w3.org/2003/01/geo/   does. 
>> 
>>  
>> 
>> But won't this work very easily every time for everyone? every time wgs84:latitude is used the crs is explicit, and myfavourite:latitude or outofthisworld:somewhere is just as easy and well-defined. 
>> 
>>  
>> 
>>  
>> 
>> The vocabulary itself can have as much or as little description of the CRS itself as is desired, minimally, it only needs to define the terms that are needed to describe a point in its model of space. but we could say more about what description should be given.
>> 
>>  
>> 
>> We could even consider adding terms like "near" into such a vocabulary as, potentially, the crs implies something about scale and resolution.  That is a question for another day.
>> 
>>  
>> 
>> If we agree on this, perhaps the same solution will also work for time.
>> 
>>  
>> 
>> This is a proposed solution, not a requirement which is the main question here.  But if this solution works then surely the requirement that CRS are mandatory becomes non- controversial, as if the best practice is followed  then by this solution it is not even possible to have a "default" crs. 
>> 
>>  
>> 
>> Kerry
>> 
>>  
>> 
>> 
>> On 2 Jul 2015, at 11:20 pm, "Svensson, Lars" <L.Svensson@dnb.de> wrote:
>> 
>> Just for the record:
>> 
>> 
>> 
>> +1 to the benefits of a default CRS, as long as any such default is well
>> 
>> documented and understood.
>> 
>> 
>> One problem with a default CRS is that if I publish data and don't specify a CRS (because the current default is correct for me) that works now. The moment some future WG decides that what we decided to be our default CRS is not accurate anymore and specifies a new default CRS, my data would be invalid (or at least partially incorrect) because it would be interpreted in context of the new default CRS. I understood from the comments yesterday that it is probably a corner case, so I won't push this any further.
>> 
>> /Lars
>> 
>> 
>>  
>> 
>> Van: SDWWG [mailto:sdwwg-
>> 
>> bounces+l.vandenbrink=geonovum.nl@lists.opengeospatial.org] Namens Ed
>> 
>> Parsons via SDWWG
>> 
>> Verzonden: donderdag 2 juli 2015 11:16
>> 
>> Aan: Peter Baumann; Bruce Bannerman; SDW WG Public List;
>> 
>> sdwwg@lists.opengeospatial.org
>> 
>> Onderwerp: Re: [SDWWG] CRS Issues [SEC=UNCLASSIFIED]
>> 
>>  
>> 
>> This issue addresses only how your reference the details of a CRS detailed at a
>> 
>> different location on the web. I think it is beyond our scope to define new
>> 
>> spatio-temporal CRS's.
>> 
>>  
>> 
>> As to the dangers of a default CRS, as long as any such default is well
>> 
>> documented and understood, there is great benefit. I look forward to continued
>> 
>> debate on this issue :-)
>> 
>>  
>> 
>>  
>> 
>> Ed
>> 
>>  
>> 
>>  
>> 
>> On Thu, 2 Jul 2015 at 09:55 Peter Baumann <p.baumann@jacobs-university.de>
>> 
>> wrote:
>> 
>> +1 from my side, plus an extra issue:
>> 
>>  
>> 
>> it is pretty clear that today we need CRSs for height and time just as much as
>> 
>> we need it for Lat and Long. Technically IMHO this means we need to come up
>> 
>> with
>> 
>> CRSs being able to hold _all_ such axes. Having all these CRSs separate and
>> 
>> with
>> 
>> individual mechanisms is a nightmare. Therefore, I'd propose a
>> 
>>  
>> 
>> Requirement:
>> 
>> It must be possible in location information item (such as coordinates) to
>> 
>> express all spatio-temporal location information in one CRS. This implies that
>> 
>> CRSs can have a different number of dimensions, depending on the dimensions
>> 
>> captured (such as 1-D time, 2-D Lat/Long, 3-D Lat/Long/time or
>> 
>> Lat/Long/height
>> 
>> or Lat/Long/Pressure, or 4-D Lat/Long/height/time).
>> 
>>  
>> 
>> Furthermore:
>> 
>>  
>> 
>> On 07/01/15 23:34, Bruce Bannerman wrote:
>> 
>> Sorry that I was not able to participate in the call.
>> 
>>  
>> 
>> Two CRS issues:
>> 
>>  
>> 
>> _CRS Definition_
>> 
>>  
>> 
>> Most of the discussion to date on this thread appears to have related to just
>> 
>> horizontal CRS. Issues relating to both vertical and temporal CRS have also
>> 
>> been discussed in a number of emails.
>> 
>>  
>> 
>> Are these CRS also covered by 1. Below.
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>> _Default CRS_
>> 
>>  
>> 
>> Issues relating to the assumption that data is based on a default CRS have
>> 
>> been raised from memory. For many use cases, this assumption can be quite
>> 
>> dangerous and can have unforeseen consequences.
>> 
>>  
>> 
>> See also my related post on 'misuse of spatial data'.
>> 
>>  
>> 
>> I'm trying to find some citable references that effectively illustrate the issue
>> 
>> of 'misuse', but have limited time. I'll keep going though, as this is an
>> 
>> important, but typically overlooked issue, as people just strive for a map as a
>> 
>> 'pretty picture'.
>> 
>>  
>> 
>> I had sent around an example where an Austrian municipality publishes its
>> 
>> coordinates - without CRS. And the silently assumed CRS is not WGS84. So
>> 
>> locating this town under the assumption of WGS84 would lead you maybe into
>> 
>> the
>> 
>> ocean.
>> 
>>  
>> 
>> -Peter
>> 
>>  
>> 
>>  
>> 
>> Bruce
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>> ________________________________
>> 
>> From: Ed Parsons <eparsons@google.com>
>> 
>> Sent: Thursday, 2 July 2015 12:14 AM
>> 
>> To: SDW WG Public List; sdwwg@lists.opengeospatial.org
>> 
>> Subject: CRS Issues
>> 
>>  
>> 
>> Thanks for you input everyone on the call today.. Here is where we stand on
>> 
>> the combined issues raised by Frans.
>> 
>>  
>> 
>> 1)The CRS Definition
>> 
>> requirement<http://w3c.github.io/sdw/UseCases/SDWUseCasesAndRequireme
>> 
>> nts.html#CRSDefinition> currently in the UCR document should be rephrased.
>> 
>> This is what ISSUE-10<https://www.w3.org/2015/spatial/track/issues/10> is
>> 
>> about. The proposal for new wording is "There should be a recommended way
>> 
>> of referencing a CRS with a HTTP URI, and to get useful information about the
>> 
>> CRS when that URI is dereferenced."
>> 
>>  
>> 
>> Agreed and accepted slight modified wording removing "recommended".
>> 
>>  
>> 
>> 2)In the course of discussing CRS requirements a new BP requirement was
>> 
>> introduced: Default
>> 
>> CRS<http://w3c.github.io/sdw/UseCases/SDWUseCasesAndRequirements.html#
>> 
>> DefaultCRS>. No issues have been raised with regard to this requirement yet.
>> 
>>  
>> 
>> New issue created but not a new formal requirement.
>> 
>>  
>> 
>> 3)In the course of discussing CRS requirements a possible new BP
>> 
>> requirement has come up. ISSUE-29 (Add a requirement for linking geometry to
>> 
>> CRS)<https://www.w3.org/2015/spatial/track/issues/29> was raised to enable
>> 
>> further discussion and/or decision-making.
>> 
>>  
>> 
>> Agreed a new requirement
>> 
>>  
>> 
>> 4)Whether 'a recommend way' is the best expression to be used in
>> 
>> requirements is something that is discussed in the thread Use of the word
>> 
>> 'standard' in the UCR document<https://lists.w3.org/Archives/Public/public-
>> 
>> sdw-wg/2015Jun/0211.html>.
>> 
>>  
>> 
>> Agreed that the appropriate term should be "Advice", rather than
>> 
>> recommended way or standard, so the BP should offer Advice as needed.
>> 
>>  
>> 
>>  
>> 
>> Ed
>> 
>>  
>> 
>>  
>> 
>> --
>> 
>> Ed Parsons
>> 
>> Geospatial Technologist, Google
>> 
>> Mobile +44 (0)7825 382263
>> 
>> www.edparsons.com<http://www.edparsons.com> @edparsons
>> 
>>  
>> 
>>  
>> 
>> --
>> 
>> Dr. Peter Baumann
>> 
>>  - Professor of Computer Science, Jacobs University Bremen
>> 
>>    www.faculty.jacobs-university.de/pbaumann
>> 
>>    mail: p.baumann@jacobs-university.de
>> 
>>    tel: +49-421-200-3178, fax: +49-421-200-493178
>> 
>>  - Executive Director, rasdaman GmbH Bremen (HRB 26793)
>> 
>>    www.rasdaman.com, mail: baumann@rasdaman.com
>> 
>>    tel: 0800-rasdaman, fax: 0800-rasdafax, mobile: +49-173-5837882
>> 
>> "Si forte in alienas manus oberraverit hec peregrina epistola incertis ventis
>> 
>> dimissa, sed Deo commendata, precamur ut ei reddatur cui soli destinata, nec
>> 
>> preripiat quisquam non sibi parata." (mail disclaimer, AD 1083)
>> 
>> --
>> 
>> Ed Parsons
>> 
>> Geospatial Technologist, Google
>> 
>> Mobile +44 (0)7825 382263
>> 
>> www.edparsons.com @edparsons
>> 
>> This message (and any attachments) is for the recipient only. NERC is subject to the Freedom of Information Act 2000 and the contents of this email and any reply you make may be disclosed by NERC unless it is exempt from release under the Act. Any material supplied to NERC may be stored in an electronic records management system.
> 
> 
> 
> -- 
> Frans Knibbe
> Geodan
> President Kennedylaan 1
> 1079 MB Amsterdam (NL)
> 
> T +31 (0)20 - 5711 347
> E frans.knibbe@geodan.nl
> www.geodan.nl
> disclaimer
> 
Received on Tuesday, 21 July 2015 11:48:29 UTC

This archive was generated by hypermail 2.3.1 : Friday, 2 September 2016 12:03:04 UTC