RE: camvas accessibility test results

They are in the email I sent to the list with the results of the testing 
but I have copied those results here. See test cases 4 and 5 (test harness 
timeouts) with links to the tests. 

I am totally slammed with other work right now, including a flight to 
Redmond which I am on now. :-) 

Mark, can you check the test harness code that Philippe worked on? Here 
are the tests rests I posted a while back with the test harness failures 
(time outs). 

1. TODO addHitRegion receives a dictionary object whose id is null, and a 
previous region has a null id

https://www.w3.org/wiki/HTML/Canvas_Task_Force/CR-Test#TODO_addHitRegion_receives_a_dictionary_object_whose_id_is_not_null.2C_and_has_a_non-null_control.2C_and_a_previous_region_having_the_same_control_exists



Passes Chrome
Passes Firefox

2. TODO addHitRegion receives a dictionary object whose id is null, and a 
previous region has a null id
https://www.w3.org/wiki/HTML/Canvas_Task_Force/CR-Test#TODO_addHitRegion_receives_a_dictionary_object_whose_id_is_null.2C_and_a_previous_region_has_a_null_id



Passes Chrome and Firefox

Also shows incomplete mapping in accessibility API as it should because 
the associated button is outside the canvas element region. 


3. TODO addHitRegion receives a dictionary object whose id is not null, 
with a non-null region, and a previous region for the id is not null
https://www.w3.org/wiki/HTML/Canvas_Task_Force/CR-Test#TODO_addHitRegion_receives_a_dictionary_object_whose_id_is_not_null.2C_with_a_non-null_region.2C_and_a_previous_region_for_the_id_is_not_null


Passes in Chrome

Firefox has a hit region on the first region that is not right but then 
again there are two regions having the same id and the second overrides 
the first. This is really an error condition as you have two hit regions 
having the same id so you would not be able to tell which object the hit 
test applied to if you had an event handler on canvas. I would consider 
this an author error although it is necessary that this be tested. 

Firefox has a width and height of the fallback button 4 pixels short of 
the 40 pixels. 
When the second, green rectangle (button 2), is drawn it also is 4 pixels 
short on the width and height and the first red rectangle (button 1).


4. addHitRegion receives a dictionary object whose id is not null, with a 
non-null region, and a non-null control id where a previous non-null 
region, associated with this control, does exist in the hit region list 
but has a different id

https://www.w3.org/wiki/HTML/Canvas_Task_Force/CR-Test#addHitRegion_receives_a_dictionary_object_whose_id_is_not_null.2C_with_a_non-null_region.2C_and_a_non-null_control_id_where_a_previous_non-null_region.2C_associated_with_this_control.2C_does_exist_in_the_hit_region_list_but_has_a_different_id


This passed both Chrome and Firefox in terms of the accessibilitiy API 
mappings and locations on the screen. For some reason the test harness 
indicated a timeout although I am not sure why

5. addHitRegion is called twice. The first call receives a dictionary 
object whose id is not null, with a non-null region, and a non-null 
control. The control is associated with a fallback <div> having a WAI-ARIA 
role="button" and descendant text. The second call receives a dictionary 
object whose id is not null, with a non-null region, and a non-null 
control. Both hit regions have distinctly different ids and controls. The 
control is associated with a fallback <a> having and descendant text. Each 
hit region is at distinctly different locations within the canvas. The 
path used to create each hit region is drawn on the canvas. Call 
removeHitRegion() for the ID of the first region.

http://cptvitamin.github.io/wpt-canvas/2dcontext/hit-regions/removeHitRegion.TwoRegions-manual.html


Chrome: 

- FAIL: the hit region start location of the red rectangle (top left is 
off) in the accessibility API. The hit regions should have been removed. 
It was not. 
- the hit region start location of the green rectangle (top left is off) 
in the accessibility API

- The test file did not implement the mouse handler to print the id's of 
the hit when you mouse over the squares. 

Firefox:

PASS except for the consistent 4 pixel errors in widths and heights. 

The test harness indicated a time out. I am not sure why. 
Rich


Rich Schwerdtfeger



From:   Paul Cotton <Paul.Cotton@microsoft.com>
To:     Richard Schwerdtfeger/Austin/IBM@IBMUS
Cc:     Canvas <public-canvas-api@w3.org>, HTML Accessibility Task Force 
<public-html-a11y@w3.org>
Date:   08/13/2015 11:18 AM
Subject:        RE: camvas accessibility test results



>Philip needs to fix one of his test cases wrt. what the author sees. His 
test case was timing out. 

Exactly which test?

Given that Philippe is on vacation is there any other way to get this 
fixed/changed?

Does this test not working block us from exiting CR?

/paulc

Sent from my Windows Phone
From: Richard Schwerdtfeger
Sent: 13/08/2015 11:53 AM
To: Paul Cotton
Cc: Canvas; HTML Accessibility Task Force
Subject: RE: camvas accessibility test results

done. I updated them yesterday. I am waiting on the fixes to happen.  I 
see some notifications that Google is making fixes and addressing issues. 

Philip needs to fix one of his test cases wrt. what the author sees. His 
test case was timing out. 


Rich Schwerdtfeger

Paul Cotton ---08/11/2015 02:29:51 PM---> Can you update the test results 
at https://www.w3.org/wiki/HTML/Canvas_Task_Force/CR-Test? Do you

From: Paul Cotton <Paul.Cotton@microsoft.com>
To: Richard Schwerdtfeger/Austin/IBM@IBMUS
Cc: Canvas <public-canvas-api@w3.org>, HTML Accessibility Task Force 
<public-html-a11y@w3.org>
Date: 08/11/2015 02:29 PM
Subject: RE: camvas accessibility test results



> Can you update the test results at 
https://www.w3.org/wiki/HTML/Canvas_Task_Force/CR-Test?
 
Do you have a schedule for updating the Canvas2D test results?
 
/paulc
 
Paul Cotton, Microsoft Canada
17 Eleanor Drive, Ottawa, Ontario K2E 6A3
Tel: (425) 705-9596 Fax: (425) 936-7329
 
From: Paul Cotton [mailto:Paul.Cotton@microsoft.com] 
Sent: Thursday, August 06, 2015 11:19 AM
To: Richard Schwerdtfeger
Cc: Dominic Mazzoni; Rik Cabanier; Canvas; HTML Accessibility Task Force
Subject: RE: camvas accessibility test results
 
Thanks for the report and update.
 
Do you think any of the reported failures should block our progress to 
Proposed Recommendation?
 
Can you update the test results at 
https://www.w3.org/wiki/HTML/Canvas_Task_Force/CR-Test?
 
/paulc 
 
Paul Cotton, Microsoft Canada
17 Eleanor Drive, Ottawa, Ontario K2E 6A3
Tel: (425) 705-9596 Fax: (425) 936-7329
 
From: Richard Schwerdtfeger [mailto:schwer@us.ibm.com] 
Sent: Wednesday, August 05, 2015 6:36 PM
To: Canvas; HTML Accessibility Task Force
Cc: Dominic Mazzoni; Rik Cabanier
Subject: camvas accessibility test results
  
I ran all the remaining canvas tests that indicated the test information 
needed to be filled in. There were a total of 5. 

Dominique you should take a look at test case 5. Let me know if you want 
me to open a bug with Chrome. 

Net, net: Chrome passes all cases except the ability to remove the hit 
region in test 5 below (I can still mouse over it and get an accessible 
from the point). This did not result in the first hit region being removed 
and the second hit region (bounds) were off in the accessibility API 
mapping. 

Rik, A general bug I found with Firefox is that the paths drawn for the 
rectangles are consistently 4 pixels short on both width and height and is 
then reflected in the hit region and accessibility API mappings. This bug 
is a general canvas problem as it impacts drawing and not just hit 
testing. There may be a transform error. 

The last two tests did not print out the results of the mouse overs to 
reflect the ids associated on a mouse "hit". The test cases are 
incomplete. I saw timeouts being generated. 

I tested with: 
Version 46.0.2473.0 canary (64-bit)   
Firefox 39


1. TODO addHitRegion receives a dictionary object whose id is null, and a 
previous region has a null id

https://www.w3.org/wiki/HTML/Canvas_Task_Force/CR-Test#TODO_addHitRegion_receives_a_dictionary_object_whose_id_is_not_null.2C_and_has_a_non-null_control.2C_and_a_previous_region_having_the_same_control_exists



Passes Chrome
Passes Firefox

2. TODO addHitRegion receives a dictionary object whose id is null, and a 
previous region has a null id
https://www.w3.org/wiki/HTML/Canvas_Task_Force/CR-Test#TODO_addHitRegion_receives_a_dictionary_object_whose_id_is_null.2C_and_a_previous_region_has_a_null_id



Passes Chrome and Firefox

Also shows incomplete mapping in accessibility API as it should because 
the associated button is outside the canvas element region. 


3. TODO addHitRegion receives a dictionary object whose id is not null, 
with a non-null region, and a previous region for the id is not null
https://www.w3.org/wiki/HTML/Canvas_Task_Force/CR-Test#TODO_addHitRegion_receives_a_dictionary_object_whose_id_is_not_null.2C_with_a_non-null_region.2C_and_a_previous_region_for_the_id_is_not_null


Passes in Chrome

Firefox has a hit region on the first region that is not right but then 
again there are two regions having the same id and the second overrides 
the first. This is really an error condition as you have two hit regions 
having the same id so you would not be able to tell which object the hit 
test applied to if you had an event handler on canvas. I would consider 
this an author error although it is necessary that this be tested. 

Firefox has a width and height of the fallback button 4 pixels short of 
the 40 pixels. 
When the second, green rectangle (button 2), is drawn it also is 4 pixels 
short on the width and height and the first red rectangle (button 1).


4. addHitRegion receives a dictionary object whose id is not null, with a 
non-null region, and a non-null control id where a previous non-null 
region, associated with this control, does exist in the hit region list 
but has a different id

https://www.w3.org/wiki/HTML/Canvas_Task_Force/CR-Test#addHitRegion_receives_a_dictionary_object_whose_id_is_not_null.2C_with_a_non-null_region.2C_and_a_non-null_control_id_where_a_previous_non-null_region.2C_associated_with_this_control.2C_does_exist_in_the_hit_region_list_but_has_a_different_id


This passed both Chrome and Firefox in terms of the accessibilitiy API 
mappings and locations on the screen. For some reason the test harness 
indicated a timeout although I am not sure why

5. addHitRegion is called twice. The first call receives a dictionary 
object whose id is not null, with a non-null region, and a non-null 
control. The control is associated with a fallback <div> having a WAI-ARIA 
role="button" and descendant text. The second call receives a dictionary 
object whose id is not null, with a non-null region, and a non-null 
control. Both hit regions have distinctly different ids and controls. The 
control is associated with a fallback <a> having and descendant text. Each 
hit region is at distinctly different locations within the canvas. The 
path used to create each hit region is drawn on the canvas. Call 
removeHitRegion() for the ID of the first region.

http://cptvitamin.github.io/wpt-canvas/2dcontext/hit-regions/removeHitRegion.TwoRegions-manual.html


Chrome: 

- FAIL: the hit region start location of the red rectangle (top left is 
off) in the accessibility API. The hit regions should have been removed. 
It was not. 
- the hit region start location of the green rectangle (top left is off) 
in the accessibility API

- The test file did not implement the mouse handler to print the id's of 
the hit when you mouse over the squares. 

Firefox:

PASS except for the consistent 4 pixel errors in widths and heights. 

The test harness indicated a time out. I am not sure why. 

Rich Schwerdtfeger

Received on Tuesday, 18 August 2015 21:37:57 UTC