Amaya and libwww

Hello,

I've been trying to install amaya on my FreeBSD 3.4, XFree86 4.1.0,
system.

First, I tried using the source distribution which, when extracted,
split into an amaya branch and a libwww branch (i.e. two separate
top-level subdirectories).  More on that in a moment.

Then, having failed that, I tried fetching the linux binary
distribution.  Relevant to that, I'm presently running the linux
binary of netscape under linux emulation.  Trying to run that from
the directory in which the executables are installed (for now)
which is /usr/local/Amaya/LINUX-ELF/bin, I get a segmentation
fault.

PC% ./amaya
Segmentation fault

And, when I initially ran it (still as root) a core dump.

If netscape (4.75) can run under linux emulation, why not amaya?

But, back to the source distribution:

When I extracted the tar file, amaya-src-5.1.tgz, in /usr/local/src
I found that it produced two subdirectories, Amaya and libwww.  I
assumed that, since libwww was distributed with amaya, it is a
prerequisite and, so, tried to build and install it first.

(The installation documentation provided with the libwww part of
the distribution is abysmal.  Contrary to apparent belief, not all
of us are able to spend all of our time connected to the web.  A
README.html file that is nothing more than a link to
http://www.w3.org/People/Frystyk/ is not appropriate installation
documentation--not all of us have a T3 connection to the Internet;
being expected to search the web for instructions and debugging
information during an installation is not very helpful.)

When I tried to build libwww, I found that make complained of
line 292 in Makefile (during "Making all in xmltok") needing an
operator.  But then I realized that I'd used the default make
instead of gmake.  So, rather than risk that I'd done something
that would interfere with gmake's operation, I removed the libwww
and the Amaya directories (rm -rf ...) and re-extracted them from
the distribution tar file (amaya-src-5.1.tgz).

I then ran (I'm using csh):

PC% ./configure |& tee -a Config.log
[... Lots of output ...]
PC% gmake |& tee -a Make.log

with the following results:

gmake: *** No rule to make target `COPYRIGHT.html', needed by `COPYRIGH'.  Stop.

I expect that I cannot build amaya until I've built libwww, right?

I shall append both the terminal output of configure which was
saved in Config.log and configure's log file, config.log.

The terminal output from configure didn't suggest any problem with
configuration.  There are various things in config.log that look
like they *COULD* be problems but I'm not expert enought to decide
that.

Thank you for any help.

Charlie Sorsby
	crs@swcp.com
	Edgewood, NM  USA

First, configure's terminal output:

creating cache ./config.cache
checking host system type... i386-unknown-freebsd3.4
checking target system type... i386-unknown-freebsd3.4
checking build system type... i386-unknown-freebsd3.4
checking for a BSD compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking for gcc... gcc
checking whether the C compiler (gcc  ) works... yes
checking whether the C compiler (gcc  ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking for POSIXized ISC... no
checking for Cygwin environment... no
no
checking for executable suffix... no
checking for ranlib... ranlib
checking for ld used by GCC... /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
updating cache ./config.cache
loading cache ./config.cache within ltconfig
checking for object suffix... o
checking for executable suffix... (cached) no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.lo... yes
checking if gcc supports -fno-rtti -fno-exceptions ... no
checking if gcc static flag -static works... -static
checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
checking command to parse /usr/bin/nm -B output... ok
checking how to hardcode library paths into programs... immediate
checking for /usr/libexec/elf/ld option to reload object files... -r
checking dynamic linker characteristics... freebsd3.4 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool
updating cache ./config.cache
loading cache ./config.cache
checking whether make sets ${MAKE}... (cached) yes
checking for a BSD compatible install... /usr/bin/install -c
checking how to run the C preprocessor... gcc -E
checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
checking whether to define additional compiler specific flags... no
checking for telnet... telnet
checking for rlogin... rlogin
checking for tn3270... tn3270
checking for perl... perl
checking for rm... /bin/rm
checking for ar... /usr/bin/ar
checking for mkdir... /bin/mkdir
checking for chmod... /bin/chmod
checking for cp... /bin/cp
checking for tar... /usr/bin/tar
checking for cvs... /usr/bin/cvs
checking for sed... /usr/bin/sed
checking for gzip... /usr/bin/gzip
checking whether ln -s works... (cached) yes
checking for resolv.conf... /etc/resolv.conf
checking for socket in -lsocket... no
checking for connect in -linet... no
checking for t_accept in -lnsl... no
checking for dlopen in -ldl... no
checking for appkit/appkit.h... no
checking for appkit.h... no
checking for arpa/inet.h... yes
checking for inet.h... no
checking for net/errno.h... no
checking for sys/errno.h... yes
checking for errno.h... yes
checking for netinet/in.h... yes
checking for in.h... no
checking for netinet/tcp.h... yes
checking for tcp.h... no
checking for sys/fcntl.h... yes
checking for fcntl.h... yes
checking for sys/file.h... yes
checking for sys/ioctl.h... yes
checking for sys/ipc.h... yes
checking for sys/limits.h... no
checking for limits.h... yes
checking for sys/machine.h... no
checking for sys/resource.h... yes
checking for resource.h... no
checking for sys/select.h... yes
checking for select.h... no
checking for sys/socket.h... yes
checking for socket.h... no
checking for sys/stat.h... yes
checking for stat.h... no
checking for sys/syslog... no
checking for syslog.h... yes
checking for sys/systeminfo.h... no
checking for sys/time.h... yes
checking for time.h... yes
checking for sys/types.h... yes
checking for types.h... no
checking for sys/unistd.h... yes
checking for unistd.h... yes
checking for wais/wais.h... no
checking for wais.h... no
checking for bsdtime.h... no
checking for bsdtypes.h... no
checking for ctype.h... yes
checking for cursesX.h... no
checking for curses.h... yes
checking for dn.h... no
checking for dnetdb.h... no
checking for grp.h... yes
checking for libc.h... no
checking for malloc.h... no
checking for manifest.h... no
checking for memory.h... yes
checking for netdb.h... yes
checking for pwd.h... yes
checking for rxposix.h... no
checking for regex.h... yes
checking for stdefs.h... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for strings.h... yes
checking for termios.h... yes
checking for unixlib.h... no
checking for dirent.h that defines DIR... yes
checking for opendir in -ldir... no
checking for dir.h... no
checking for direct.h... no
checking for ANSI C header files... yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether stat file-mode macros are broken... no
checking for uid_t in sys/types.h... yes
checking for pid_t... yes
checking type of array argument to getgroups... gid_t
checking for mode_t... yes
checking for size_t... yes
checking return type of signal handlers... void
checking for BOOLEAN... no
checking for u_char... yes
checking for u_short... yes
checking for u_long... yes
checking size of char... 1
checking size of char *... 4
checking size of int... 4
checking size of long... 4
checking for whether time_t is long... yes
checking for whether size_t is long... no
checking for working const... yes
checking whether byte ordering is bigendian... no
checking whether char is unsigned... no
checking for long double... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for tm_gmtoff in struct tm... yes
checking for time.h that defines timezone... yes
checking for time.h that defines altzone... no
checking for time.h that defines daylight... no
checking if timezone is backwards... no
checking for tm_zone in struct tm... yes
checking for winsize structure... yes
checking for vprintf... yes
checking for strftime... yes
checking for getcwd... yes
checking for gethostname... yes
checking for getdomainname... yes
checking for getwd... yes
checking for select... yes
checking for socket... yes
checking for strerror... yes
checking for strtol... yes
checking for opendir... yes
checking for getpid... yes
checking for strchr... yes
checking for memcpy... yes
checking for getlogin... yes
checking for getpass... yes
checking for fcntl... yes
checking for readdir... yes
checking for sysinfo... no
checking for ioctl... yes
checking for chdir... yes
checking for tempnam... yes
checking for getsockopt... yes
checking for setsockopt... yes
checking for gettimeofday... yes
checking for mktime... yes
checking for timegm... yes
checking for tzset... yes
checking for unlink... yes
checking whether to support direct WAIS access.... no
checking whether to support zlib compress/decompress... no
checking whether to support POSIX regex... no
checking whether to support SOCKS... no
checking whether to support SOCKS5... no
checking whether to support SOCKS4... no
checking whether to support mysql access.... no
checking whether we include the Expat XML parser.... yes
checking whether we include MD5 support for HTTP Digest Authentication.... yes
checking whether to use internal signal handlers... no
checking whether to disable Nagle's algorithm... yes
checking whether to accept new rule files without asking an end user.... no
checking whether to disable HTTP/1.1 pipelining... no
checking whether to use MUX as transport for HTTP.... no
checking whether to define _REENTRANT... no
checking whether to define _POSIX_SOURCE... no
updating cache ./config.cache
creating ./config.status
creating Makefile
creating libwww-config
creating w3c-libwww.spec
creating config/Makefile
creating modules/Makefile
creating modules/expat/Makefile
creating modules/expat/xmltok/Makefile
creating modules/expat/xmlparse/Makefile
creating modules/md5/Makefile
creating Library/Makefile
creating Library/src/Makefile
creating Library/src/windows/Makefile
creating Library/src/vms/Makefile
creating wwwconf.h




And now, config.log:

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

configure:776: checking host system type
configure:797: checking target system type
configure:815: checking build system type
configure:887: checking for a BSD compatible install
configure:940: checking whether build environment is sane
configure:978: checking whether make sets ${MAKE}
configure:1024: checking for working aclocal
configure:1037: checking for working autoconf
configure:1050: checking for working automake
configure:1063: checking for working autoheader
configure:1076: checking for working makeinfo
configure:1097: checking for gcc
configure:1210: checking whether the C compiler (gcc  ) works
configure:1226: gcc -o conftest    conftest.c  1>&5
configure:1252: checking whether the C compiler (gcc  ) is a cross-compiler
configure:1257: checking whether we are using GNU C
configure:1266: gcc -E conftest.c
configure:1285: checking whether gcc accepts -g
configure:1317: checking for POSIXized ISC
configure:1338: checking for Cygwin environment
configure:1354: gcc -c -g -O2  conftest.c 1>&5
configure: In function `main':
configure:1350: `__CYGWIN32__' undeclared (first use this function)
configure:1350: (Each undeclared identifier is reported only once
configure:1350: for each function it appears in.)
configure: failed program was:
#line 1343 "configure"
#include "confdefs.h"

int main() {

#ifndef __CYGWIN__
#define __CYGWIN__ __CYGWIN32__
#endif
return __CYGWIN__;
; return 0; }
configure:1370: checking for mingw32 environment
configure:1382: gcc -c -g -O2  conftest.c 1>&5
configure: In function `main':
configure:1378: `__MINGW32__' undeclared (first use this function)
configure:1378: (Each undeclared identifier is reported only once
configure:1378: for each function it appears in.)
configure: failed program was:
#line 1375 "configure"
#include "confdefs.h"

int main() {
return __MINGW32__;
; return 0; }
configure:1400: checking for executable suffix
configure:1410: gcc -o conftest -g -O2   conftest.c  1>&5
configure:1501: checking for ranlib
configure:1540: checking for ld used by GCC
configure:1603: checking if the linker (/usr/libexec/elf/ld) is GNU ld
GNU ld version 2.9.1 (with BFD 2.9.1)
configure:1619: checking for BSD-compatible nm
configure:1656: checking whether ln -s works
ltconfig:603: checking for object suffix
ltconfig:604: gcc -c -g -O2  conftest.c 1>&5
ltconfig:776: checking if gcc PIC flag -fPIC works
ltconfig:777: gcc -c -g -O2 -fPIC -DPIC  conftest.c 1>&5
ltconfig:829: checking if gcc supports -c -o file.o
ltconfig:830: gcc -c -g -O2 -o out/conftest2.o  conftest.c 1>&5
ltconfig:862: checking if gcc supports -c -o file.lo
ltconfig:863: gcc -c -g -O2 -c -o conftest.lo  conftest.c 1>&5
ltconfig:914: checking if gcc supports -fno-rtti -fno-exceptions
ltconfig:915: gcc -c -g -O2 -fno-rtti -fno-exceptions -c conftest.c  conftest.c 1>&5
cc1: Invalid option `-fno-exceptions'
cc1: Invalid option `-fno-exceptions'
ltconfig:958: checking if gcc static flag -static works
ltconfig:959: gcc -o conftest -g -O2   -static conftest.c  1>&5
GNU ld version 2.9.1 (with BFD 2.9.1)
ltconfig:1635: checking if global_symbol_pipe works
ltconfig:1636: gcc -c -g -O2  conftest.c 1>&5
ltconfig:1639: eval "/usr/bin/nm -B conftest.o | sed -n -e 's/^.*[ 	]\([ABCDGISTW]\)[ 	][ 	]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' > conftest.nm"
ltconfig:1691: gcc -o conftest -g -O2 -fno-builtin   conftest.c conftstm.o 1>&5
configure:1836: checking whether make sets ${MAKE}
configure:1874: checking for a BSD compatible install
configure:1928: checking how to run the C preprocessor
configure:1949: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:2012: checking for X
configure:2249: checking whether to define additional compiler specific flags
configure:2277: checking for telnet
configure:2317: checking for rlogin
configure:2357: checking for tn3270
configure:2397: checking for perl
configure:2433: checking for rm
configure:2469: checking for ar
configure:2505: checking for mkdir
configure:2541: checking for chmod
configure:2577: checking for cp
configure:2613: checking for tar
configure:2649: checking for cvs
configure:2685: checking for sed
configure:2723: checking for gzip
configure:2760: checking whether ln -s works
configure:2784: checking for resolv.conf
configure:2829: checking for socket in -lsocket
configure:2848: gcc -o conftest -g -O2   conftest.c -lsocket   1>&5
/usr/libexec/elf/ld: cannot open -lsocket: No such file or directory
configure: failed program was:
#line 2837 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char socket();

int main() {
socket()
; return 0; }
configure:2876: checking for connect in -linet
configure:2895: gcc -o conftest -g -O2   conftest.c -linet   1>&5
/usr/libexec/elf/ld: cannot open -linet: No such file or directory
configure: failed program was:
#line 2884 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char connect();

int main() {
connect()
; return 0; }
configure:2923: checking for t_accept in -lnsl
configure:2942: gcc -o conftest -g -O2   conftest.c -lnsl   1>&5
/usr/libexec/elf/ld: cannot open -lnsl: No such file or directory
configure: failed program was:
#line 2931 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char t_accept();

int main() {
t_accept()
; return 0; }
configure:2970: checking for dlopen in -ldl
configure:2989: gcc -o conftest -g -O2   conftest.c -ldl   1>&5
/usr/libexec/elf/ld: cannot open -ldl: No such file or directory
configure: failed program was:
#line 2978 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {
dlopen()
; return 0; }
configure:3021: checking for appkit/appkit.h
configure:3031: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3027: appkit/appkit.h: No such file or directory
configure: failed program was:
#line 3026 "configure"
#include "confdefs.h"
#include <appkit/appkit.h>
configure:3021: checking for appkit.h
configure:3031: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3027: appkit.h: No such file or directory
configure: failed program was:
#line 3026 "configure"
#include "confdefs.h"
#include <appkit.h>
configure:3061: checking for arpa/inet.h
configure:3071: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3061: checking for inet.h
configure:3071: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3067: inet.h: No such file or directory
configure: failed program was:
#line 3066 "configure"
#include "confdefs.h"
#include <inet.h>
configure:3101: checking for net/errno.h
configure:3111: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3107: net/errno.h: No such file or directory
configure: failed program was:
#line 3106 "configure"
#include "confdefs.h"
#include <net/errno.h>
configure:3101: checking for sys/errno.h
configure:3111: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3101: checking for errno.h
configure:3111: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3141: checking for netinet/in.h
configure:3151: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3141: checking for in.h
configure:3151: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3147: in.h: No such file or directory
configure: failed program was:
#line 3146 "configure"
#include "confdefs.h"
#include <in.h>
configure:3181: checking for netinet/tcp.h
configure:3191: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3181: checking for tcp.h
configure:3191: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3187: tcp.h: No such file or directory
configure: failed program was:
#line 3186 "configure"
#include "confdefs.h"
#include <tcp.h>
configure:3221: checking for sys/fcntl.h
configure:3231: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3221: checking for fcntl.h
configure:3231: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3261: checking for sys/file.h
configure:3271: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3301: checking for sys/ioctl.h
configure:3311: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3341: checking for sys/ipc.h
configure:3351: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3381: checking for sys/limits.h
configure:3391: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3387: sys/limits.h: No such file or directory
configure: failed program was:
#line 3386 "configure"
#include "confdefs.h"
#include <sys/limits.h>
configure:3381: checking for limits.h
configure:3391: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3421: checking for sys/machine.h
configure:3431: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3427: sys/machine.h: No such file or directory
configure: failed program was:
#line 3426 "configure"
#include "confdefs.h"
#include <sys/machine.h>
configure:3461: checking for sys/resource.h
configure:3471: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3461: checking for resource.h
configure:3471: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3467: resource.h: No such file or directory
configure: failed program was:
#line 3466 "configure"
#include "confdefs.h"
#include <resource.h>
configure:3501: checking for sys/select.h
configure:3511: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3501: checking for select.h
configure:3511: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3507: select.h: No such file or directory
configure: failed program was:
#line 3506 "configure"
#include "confdefs.h"
#include <select.h>
configure:3541: checking for sys/socket.h
configure:3551: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3541: checking for socket.h
configure:3551: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3547: socket.h: No such file or directory
configure: failed program was:
#line 3546 "configure"
#include "confdefs.h"
#include <socket.h>
configure:3581: checking for sys/stat.h
configure:3591: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3581: checking for stat.h
configure:3591: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3587: stat.h: No such file or directory
configure: failed program was:
#line 3586 "configure"
#include "confdefs.h"
#include <stat.h>
configure:3621: checking for sys/syslog
configure:3631: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3627: sys/syslog: No such file or directory
configure: failed program was:
#line 3626 "configure"
#include "confdefs.h"
#include <sys/syslog>
configure:3621: checking for syslog.h
configure:3631: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3661: checking for sys/systeminfo.h
configure:3671: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3667: sys/systeminfo.h: No such file or directory
configure: failed program was:
#line 3666 "configure"
#include "confdefs.h"
#include <sys/systeminfo.h>
configure:3701: checking for sys/time.h
configure:3711: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3701: checking for time.h
configure:3711: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3741: checking for sys/types.h
configure:3751: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3741: checking for types.h
configure:3751: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3747: types.h: No such file or directory
configure: failed program was:
#line 3746 "configure"
#include "confdefs.h"
#include <types.h>
configure:3781: checking for sys/unistd.h
configure:3791: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3781: checking for unistd.h
configure:3791: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3821: checking for wais/wais.h
configure:3831: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3827: wais/wais.h: No such file or directory
configure: failed program was:
#line 3826 "configure"
#include "confdefs.h"
#include <wais/wais.h>
configure:3821: checking for wais.h
configure:3831: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3827: wais.h: No such file or directory
configure: failed program was:
#line 3826 "configure"
#include "confdefs.h"
#include <wais.h>
configure:3861: checking for bsdtime.h
configure:3871: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3867: bsdtime.h: No such file or directory
configure: failed program was:
#line 3866 "configure"
#include "confdefs.h"
#include <bsdtime.h>
configure:3901: checking for bsdtypes.h
configure:3911: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3907: bsdtypes.h: No such file or directory
configure: failed program was:
#line 3906 "configure"
#include "confdefs.h"
#include <bsdtypes.h>
configure:3941: checking for ctype.h
configure:3951: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3981: checking for cursesX.h
configure:3991: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3987: cursesX.h: No such file or directory
configure: failed program was:
#line 3986 "configure"
#include "confdefs.h"
#include <cursesX.h>
configure:3981: checking for curses.h
configure:3991: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4021: checking for dn.h
configure:4031: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4027: dn.h: No such file or directory
configure: failed program was:
#line 4026 "configure"
#include "confdefs.h"
#include <dn.h>
configure:4061: checking for dnetdb.h
configure:4071: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4067: dnetdb.h: No such file or directory
configure: failed program was:
#line 4066 "configure"
#include "confdefs.h"
#include <dnetdb.h>
configure:4101: checking for grp.h
configure:4111: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4141: checking for libc.h
configure:4151: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4147: libc.h: No such file or directory
configure: failed program was:
#line 4146 "configure"
#include "confdefs.h"
#include <libc.h>
configure:4181: checking for malloc.h
configure:4191: gcc -E  conftest.c >/dev/null 2>conftest.out
In file included from configure:4187:
/usr/include/malloc.h:2: warning: #warning "this file includes <malloc.h> which is deprecated, use <stdlib.h> instead"
configure: failed program was:
#line 4186 "configure"
#include "confdefs.h"
#include <malloc.h>
configure:4221: checking for manifest.h
configure:4231: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4227: manifest.h: No such file or directory
configure: failed program was:
#line 4226 "configure"
#include "confdefs.h"
#include <manifest.h>
configure:4261: checking for memory.h
configure:4271: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4301: checking for netdb.h
configure:4311: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4341: checking for pwd.h
configure:4351: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4381: checking for rxposix.h
configure:4391: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4387: rxposix.h: No such file or directory
configure: failed program was:
#line 4386 "configure"
#include "confdefs.h"
#include <rxposix.h>
configure:4381: checking for regex.h
configure:4391: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4421: checking for stdefs.h
configure:4431: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4427: stdefs.h: No such file or directory
configure: failed program was:
#line 4426 "configure"
#include "confdefs.h"
#include <stdefs.h>
configure:4461: checking for stdio.h
configure:4471: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4501: checking for stdlib.h
configure:4511: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4541: checking for string.h
configure:4551: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4541: checking for strings.h
configure:4551: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4581: checking for termios.h
configure:4591: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4621: checking for unixlib.h
configure:4631: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4627: unixlib.h: No such file or directory
configure: failed program was:
#line 4626 "configure"
#include "confdefs.h"
#include <unixlib.h>
configure:4662: checking for dirent.h that defines DIR
configure:4675: gcc -c -g -O2  conftest.c 1>&5
configure:4700: checking for opendir in -ldir
configure:4719: gcc -o conftest -g -O2   conftest.c -ldir   1>&5
/usr/libexec/elf/ld: cannot open -ldir: No such file or directory
configure: failed program was:
#line 4708 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char opendir();

int main() {
opendir()
; return 0; }
configure:4786: checking for dir.h
configure:4796: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4792: dir.h: No such file or directory
configure: failed program was:
#line 4791 "configure"
#include "confdefs.h"
#include <dir.h>
configure:4786: checking for direct.h
configure:4796: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4792: direct.h: No such file or directory
configure: failed program was:
#line 4791 "configure"
#include "confdefs.h"
#include <direct.h>
configure:4822: checking for ANSI C header files
configure:4835: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4902: gcc -o conftest -g -O2   conftest.c  1>&5
configure:4926: checking for sys/wait.h that is POSIX.1 compatible
configure:4947: gcc -c -g -O2  conftest.c 1>&5
configure:4968: checking whether time.h and sys/time.h may both be included
configure:4982: gcc -c -g -O2  conftest.c 1>&5
configure:5003: checking whether stat file-mode macros are broken
configure:5060: checking for uid_t in sys/types.h
configure:5094: checking for pid_t
configure:5127: checking type of array argument to getgroups
configure:5160: gcc -o conftest -g -O2   conftest.c  1>&5
configure:5198: checking for mode_t
configure:5231: checking for size_t
configure:5264: checking return type of signal handlers
configure:5286: gcc -c -g -O2  conftest.c 1>&5
configure:5306: checking for BOOLEAN
configure:5339: checking for u_char
configure:5372: checking for u_short
configure:5405: checking for u_long
configure:5439: checking size of char
configure:5458: gcc -o conftest -g -O2   conftest.c  1>&5
configure:5478: checking size of char *
configure:5497: gcc -o conftest -g -O2   conftest.c  1>&5
configure:5517: checking size of int
configure:5536: gcc -o conftest -g -O2   conftest.c  1>&5
configure:5556: checking size of long
configure:5575: gcc -o conftest -g -O2   conftest.c  1>&5
configure:5595: checking for whether time_t is long
configure:5609: gcc -o conftest -g -O2   conftest.c  1>&5
configure: failed program was:
#line 5603 "configure"
#include "confdefs.h"

#include <time.h>
int main() { exit(sizeof(time_t) == sizeof(long)); }
configure:5633: checking for whether size_t is long
configure:5647: gcc -o conftest -g -O2   conftest.c  1>&5
configure: failed program was:
#line 5641 "configure"
#include "confdefs.h"

#include <stddef.h>
int main() { exit(sizeof(size_t) == sizeof(int)); }
configure:5672: checking for working const
configure:5726: gcc -c -g -O2  conftest.c 1>&5
configure:5747: checking whether byte ordering is bigendian
configure:5765: gcc -c -g -O2  conftest.c 1>&5
configure:5780: gcc -c -g -O2  conftest.c 1>&5
configure: In function `main':
configure:5775: `not' undeclared (first use this function)
configure:5775: (Each undeclared identifier is reported only once
configure:5775: for each function it appears in.)
configure:5775: parse error before `big'
configure: failed program was:
#line 5769 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() {

#if BYTE_ORDER != BIG_ENDIAN
 not big endian
#endif
; return 0; }
configure:5837: checking whether char is unsigned
configure:5900: checking for long double
configure:5944: checking whether struct tm is in sys/time.h or time.h
configure:5957: gcc -c -g -O2  conftest.c 1>&5
configure:5978: checking for tm_gmtoff in struct tm
configure:5991: gcc -c -g -O2  conftest.c 1>&5
configure:6012: checking for time.h that defines timezone
configure:6024: gcc -c -g -O2  conftest.c 1>&5
configure: In function `main':
configure:6020: warning: return makes integer from pointer without a cast
configure:6045: checking for time.h that defines altzone
configure:6057: gcc -c -g -O2  conftest.c 1>&5
configure: In function `main':
configure:6053: `altzone' undeclared (first use this function)
configure:6053: (Each undeclared identifier is reported only once
configure:6053: for each function it appears in.)
configure: failed program was:
#line 6050 "configure"
#include "confdefs.h"
#include <time.h>
int main() {
return altzone;
; return 0; }
configure:6078: checking for time.h that defines daylight
configure:6090: gcc -c -g -O2  conftest.c 1>&5
configure: In function `main':
configure:6086: `daylight' undeclared (first use this function)
configure:6086: (Each undeclared identifier is reported only once
configure:6086: for each function it appears in.)
configure: failed program was:
#line 6083 "configure"
#include "confdefs.h"
#include <time.h>
int main() {
return daylight;
; return 0; }
configure:6112: checking if timezone is backwards
configure:6139: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6163: checking for tm_zone in struct tm
configure:6176: gcc -c -g -O2  conftest.c 1>&5
configure:6233: checking for winsize structure
configure:6252: gcc -c -g -O2  conftest.c 1>&5
configure:6274: checking for vprintf
configure:6302: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6379: checking for strftime
configure:6407: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for getcwd
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for gethostname
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for getdomainname
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for getwd
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for select
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for socket
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for strerror
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for strtol
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for opendir
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for getpid
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for strchr
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for memcpy
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6493: warning: conflicting types for built-in function `memcpy'
configure:6481: checking for getlogin
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for getpass
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for fcntl
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for readdir
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for sysinfo
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
/var/tmp/ccj894571.o: In function `main':
/usr/local/src/libwww/configure(.text+0x4): undefined reference to `sysinfo'
configure: failed program was:
#line 6486 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char sysinfo(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char sysinfo();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_sysinfo) || defined (__stub___sysinfo)
choke me
#else
sysinfo();
#endif

; return 0; }
configure:6481: checking for ioctl
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for chdir
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for tempnam
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for getsockopt
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for setsockopt
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for gettimeofday
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for mktime
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for timegm
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6481: checking for tzset
configure:6509: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6534: checking for unlink
configure:6562: gcc -o conftest -g -O2   conftest.c  1>&5
configure:6634: checking whether to support direct WAIS access.
configure:6694: checking whether to support zlib compress/decompress
configure:6762: checking whether to support POSIX regex
configure:6853: checking whether to support SOCKS
configure:6960: checking whether to support SOCKS5
configure:7011: checking whether to support SOCKS4
configure:7083: checking whether to support mysql access.
configure:7159: checking whether we include the Expat XML parser.
configure:7218: checking whether we include MD5 support for HTTP Digest Authentication.
configure:7257: checking whether to use internal signal handlers
configure:7280: checking whether to disable Nagle's algorithm
configure:7307: checking whether to accept new rule files without asking an end user.
configure:7330: checking whether to disable HTTP/1.1 pipelining
configure:7354: checking whether to use MUX as transport for HTTP.
configure:7377: checking whether to define _REENTRANT
configure:7401: checking whether to define _POSIX_SOURCE

Received on Monday, 17 September 2001 03:37:52 UTC