RE: TTS proposal to split Utterance into its own interface

I would  think that cancelling all utterances would be the more common use case (so we ought to make it easy).  Question:  Can a cancelled utterance be re-queued? 

- Jim

-----Original Message-----
From: Nagesh Kharidi [mailto:nagesh@openstream.com] 
Sent: Friday, September 14, 2012 8:58 AM
To: Glen Shires; Dominic Mazzoni
Cc: Hans Wennborg; olli@pettay.fi; public-speech-api@w3.org
Subject: Re: TTS proposal to split Utterance into its own interface

I would like to propose the following:
1. Provide the ability to cancel all currently queued utterances. A new cancelAll method could be added. Alternately, invoking the cancel method without the utterance parameter could imply cancel all utterances.

2. New speakNext SpeechSynthesis method
This method will append the utterance to the beginning of the queue.

3. New oncancel SpeechSynthesisUtterance event Fired when the utterance is canceled.

4. New canceled SpeechSynthesisUtterance attribute true if the utterance is canceled.


I also had a question regarding the stop method: Is "flushes the queue"
equivalent to calling cancel on all utterances in the queue? If so, I would like to suggest changing "flushes the queue" to "cancels all utterances in the queue".

Regards,
Nagesh

On Thu, 13 Sep 2012 14:13:56 -0700
 Glen Shires <gshires@google.com> wrote:
>Yes, I like the way you've defined the "speak" method to not change the 
>play/pause state. Also, I didn't particularly like the word "playback", 
>so thanks for the alternative "spoken".  Here's updated definitions 
>with your suggestions incorporated. If there's no disagreement, I'll 
>add them to the spec on Monday.
>
>
>SpeechSynthesis Attributes
>
>pending attribute:
>This attribute is true if the queue for this SpeechSynthesis object 
>contains any utterances which have not started speaking.
>
>speaking attribute:
>This attribute is true if an utterance is being spoken. Specifically if 
>an utterance has begun being spoken and has not completed being spoken, 
>and is independent of whether this SpeechSynthesis object is in the 
>paused state.
>
>paused attribute:
>The attribute is true when this SpeechSynthesis object is in the paused 
>state. This state is independent of whether anything is in the queue.
>The
>default state of a new SpeechSynthesis object is the non-paused state.
>
>
>SpeechSynthesis Methods
>
>The speak method
>This method appends the utterance to the end of the queue for this 
>SpeechSynthesis object. It does not change the paused state of the 
>SpeechSynthesis object.  If the SpeechSynthesis object is paused, it 
>remains paused. If it is not paused, then this utterance is spoken if 
>no other utterances are in the queue, else this utterance is queued to 
>begin speaking after the other utterances in the queue have been 
>spoken.
>
>The cancel method
>This method removes the specified utterance from the queue. If it is 
>not in the queue, no changes are made. If the utterance removed is 
>being spoken, speaking ceases for that utterance and the next utterance 
>in the queue (if
>any) begins to be spoken. This method does not change the paused state 
>of the SpeechSynthesis object.
>
>The pause method
>This method puts the SpeechSynthesis object into the paused state. If 
>an utterance was being spoken, it pauses mid-utterance. (If called when 
>the SpeechSynthesis object was already in the paused state, it does
>nothing.)
>
>The continue method
>This method puts the SpeechSynthesis object into the non-paused state.
>If
>an utterance was speaking (that is, its speaking attribute is true), it 
>continues speaking the utterance at the point at which it was paused, 
>else it begins speaking the next utterance in the queue (if any). (If 
>called when the SpeechSynthesis object was already in the non-paused 
>state, it does nothing.)
>
>The stop method.
>This method puts the SpeechSynthesis object into the paused state and 
>flushes the queue. It sets the speaking attribute to false and the 
>paused attribute to true.
>
>
>SpeechSynthesisUtterance attributes
>
>
>[[Note, I used SHOULD here because there may be some race-condition 
>edge-cases where it might not be ignored.]]
>
>text attribute:
>The text to be synthesized for this utterance. Changes to this 
>attribute after the utterance has been added to the queue (by calling 
>the speak
>method) SHOULD be ignored.
>
>lang attribute:
>[no change except to append the following] Changes to this attribute 
>after the utterance has been added to the queue (by calling the speak
>method)
>SHOULD be ignored.
>
>serviceURI attribute:
>[no change except to append the following] Changes to this attribute 
>after the utterance has been added to the queue (by calling the speak
>method)
>SHOULD be ignored.
>
>speaking attribute:
>This attribute is true if this specific utterance is currently being 
>spoken. Specifically if this utterance has begun being spoken and has 
>not completed being spoken. This is independent of whether the 
>SpeechSynthesis object is in a paused state.
>
>paused attribute:
>This attribute is true if this specific utterance has begun to be 
>spoken, but has not completed and the SpeechSynthesis object is in the 
>paused state.
>
>ended attribute:
>This attribute is true if this specific utterance has completed being 
>spoken.
>
>SpeechSynthesisUtterance events
>
>onstart event:
>Fired when this utterance has begun to be spoken.
>
>onend event:
>Fired when this utterance has completed being spoken.
>
>
>
>On Thu, Sep 13, 2012 at 10:25 AM, Dominic Mazzoni
><dmazzoni@google.com>wrote:
>
>> Thanks for proposing definitions.
>>
>> On Tue, Sep 11, 2012 at 3:02 AM, Glen Shires <gshires@google.com>
>wrote:
>> > I propose the following definitions for the SpeechSynthesis IDL:
>> >
>> > SpeechSynthesis Attributes
>> >
>> > pending attribute:
>> > This attribute is true if the queue contains any utterances which
>have
>> not
>> > completed playback.
>>
>> I was imagining: This attribute is true if the queue contains any 
>> utterances which have not *started* speaking.
>>
>> > speaking attribute:
>> > This attribute is true if playback is in progress.
>>
>> I don't like the word "playback", it doesn't fit when the speech is 
>> generated dynamically. How about: This attribute is true if an 
>> utterance is being spoken.
>>
>> > paused attribute:
>> >   **** How is this different than (pending && !speaking) ? ****
>>
>> This is true if the speech synthesis system is in a paused state, 
>> independent of whether anything is speaking or queued.
>>
>> paused && speaking -> it was paused in the middle of an utterance 
>> paused && !speaking -> no utterance is speaking, but if you call 
>> speak(), nothing will happen because it's in a paused state.
>>
>> >
>> > SpeechSynthesis Methods
>> >
>> > The speak method
>> > This method appends the utterance to the end of a playback queue.
>If
>> > playback is not in progress, it also begins playback of the next
>item in
>> the
>> > queue.
>>
>> What do you think about rewriting to not use "playback"?
>>
>> Also, my idea was that it would not begin playback if the system is
>in
>> a paused state.
>>
>> > The cancel method
>> > This method removes the first matching utterance (if any) from the
>> playback
>> > queue. If playback is in progress and the utterance removed is
>being
>> played,
>> > playback ceases for the utterance and the next utterance in the
>queue (if
>> > any) begins playing.
>>
>> Do we need to say "first matching"? Each utterance should be a 
>> specific object, it should be either in the queue or not.
>>
>> > The pause method
>> > This method pauses the playback mid-utterance. If playback is not
>in
>> > progress, it does nothing.
>>
>> I was assuming that calling it would set the system into a paused 
>> state, so that even a subsequent call to speak() would not do
>anything
>> other than enqueue.
>>
>> > The continue method
>> > This method continues the playback at the point in the utterance
>and
>> queue
>> > in which it was paused.  If playback is in progress, it does
>nothing.
>> >
>> > The stop method.
>> > This method stops playback mid-utterance and flushes the queue.
>> >
>> >
>> > SpeechSynthesisUtterance attributes
>> >
>> > text attribute:
>> > The text to be synthesized for this utterance. This attribute must
>not be
>> > changed after onstart fires.
>>
>> I'd say: changes to this attribute after the utterance has been
>added
>> to the queue (by calling "speak") will be ignored. OR, we should
>make
>> it a DOM exception to modify it when it's in the speech queue.
>>
>> > paused attribute:
>> > This attribute is true if this specific utterance is in the queue
>and has
>> > not completed playback.
>>
>> I think this should only be true if it has begin speaking but not 
>> completed.
>>
>> - Dominic
>>

--
NOTICE TO RECIPIENT:  
THIS E-MAIL IS  MEANT FOR ONLY THE INTENDED RECIPIENT OF THE TRANSMISSION, AND MAY BE A COMMUNICATION PRIVILEGED BY LAW.  IF YOU RECEIVED THIS E-MAIL IN ERROR, ANY REVIEW, USE, DISSEMINATION, DISTRIBUTION, OR COPYING OF THIS E-MAIL IS STRICTLY PROHIBITED.  PLEASE NOTIFY US IMMEDIATELY OF THE ERROR BY RETURN E-MAIL AND PLEASE DELETE THIS MESSAGE FROM YOUR SYSTEM. THANK YOU IN ADVANCE FOR YOUR COOPERATION. 
Reply to : legal@openstream.com

Received on Friday, 14 September 2012 13:04:44 UTC