Re: Proposal: New Frame Size Text (was: Re: Design Issue: Frame Size Items)

On Thu, May 9, 2013 at 2:01 PM, William Chan (陈智昌)
<willchan@chromium.org> wrote:
> I discussed this with Roberto and Hasan. Here are some thoughts on including
> header blocks within flow control:
>

Note that my proposal does not explicitly state that the header blocks
would be put covered by flow control, only that the current window
size be used to limit the maximum allowed size of those frames.
Whether or not headers count towards the flow control limits is a
separate (but definitely related) question... with that in mind, some
responses below...

> * In the proposed text, it appears that only the compressed header block is
> counting towards the window. Is that really what's desirable in order to
> properly control memory? Processing the header block requires decompressing
> it, and that's what will be kept in memory buffers until drained by the
> sink.

Yes, I think it is desirable. The memory management for the
decompressor state is separate from the notion of how much data the
receiver is willing to accept over the network. It's likely, for
instance, that the data in a DATA frame could be compressed as well.
It would not really make sense to count the decompressed bytes there
towards the flow control limits.

> * One problem with having headers count toward the per-stream flow control
> window is that, in non-HTTP semantic layering, the header metadata could be
> used as a control channel for the stream. Similar to how it would be
> unfortunate to block connection control frames with the session flow control
> window, it might also be unfortunate to block stream header/control frames
> on the per-stream flow control window.

Agreed. That said, however, because header blocks contain user
provided data, not including these in flow control opens the distinct
likelihood for abuse. For instance, if an application is not able to
get it's data passed through in DATA frames because of flow control
issues, they could simply bypass flow control by packaging the data up
into headers frames. Whether that's a realistic risk or not, I don't
know, but I've learned to never underestimate the ingenuity of
developers who are motivated enough to work around MUST and SHOULD
level requirements. :-)

- James

> * As previously noted in other threads, it's unfortunate that stream headers
> aren't counted toward any flow control windows, since that means we may have
> to use the last-resort option to prevent further memory consumption - stop
> calling read().
>
>
> On Wed, May 8, 2013 at 9:12 PM, James M Snell <jasnell@gmail.com> wrote:
>>
>> Suggested replacement text for the current "Frame Size" discussion in
>> the spec...
>>
>> ...
>>    While the flow control protocol and framing mechanisms defined by
>> this specification are largely independent of one another, the flow
>> control WINDOW_SIZE places an upper limit on the total amount of data
>> an endpoint can send to a peer at any given time. DATA, HEADERS,
>> HEADERS+PRIORITY and PUSH_PROMISE frame sizes MUST NOT exceed the
>> current WINDOW_SIZE for the stream or connection and MUST NOT be
>> greater than 65,535 bytes. The 8 bytes of the frame header are not
>> counted toward this limit.
>>
>>    When a new connection is established, both endpoints are permitted
>> to begin sending frames prior to the establishment of an initial flow
>> control WINDOW_SIZE. Accordingly, there is a risk that an endpoint
>> might initially send frames that are too large for the peer to handle.
>> To mitigate this risk, it is RECOMMENDED that, until the initial
>> WINDOW_SIZE is established, the total size of individual
>> header-bearing frames not exceed the current TCP Maximum Segment Size
>> (MSS) and that individual DATA frames are no larger than 4096 bytes.
>> The 8-byte frame header is included in these limits.
>>
>> If an endpoint is unable to process a frame due to its size and the
>> frame specifies any stream identifier field value other than 0x0, the
>> endpoint MUST respond with a <xref target="StreamErrorHandler">stream
>> error</xref> using the FRAME_TOO_LARGE error code. If the stream
>> identifier field value is 0x0, the endpoint MUST send a <xref
>> target="ConnectionErrorHandler">connection error</xref> using the
>> FRAME_TOO_LARGE error code.
>> ...
>>
>> - James
>>
>>
>>
>> On Wed, May 8, 2013 at 1:56 PM, Poul-Henning Kamp <phk@phk.freebsd.dk>
>> wrote:
>> > In message
>> > <CABP7Rbc8rs4-ktyGKwVxVC4MztcvYtARqBDoyEBYujfcpo4YDw@mail.gmail.com>
>> > , James M Snell writes:
>> >
>> >>Going back through this, here's a counter proposal:
>> >>
>> >>Let's get rid of the 8192 frame size rule and simply say that the
>> >>maximum size for all DATA, HEADERS, HEADERS+PRIORITY and PUSH_PROMISE
>> >>frames is either 65,535 or the current flow control WINDOW_SIZE,
>> >>whichever is less.
>> >
>> > Hmm, *now* you're talking...
>> >
>> > I like it.
>> >
>> > --
>> > Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
>> > phk@FreeBSD.ORG         | TCP/IP since RFC 956
>> > FreeBSD committer       | BSD since 4.3-tahoe
>> > Never attribute to malice what can adequately be explained by
>> > incompetence.
>
>

Received on Thursday, 9 May 2013 21:21:21 UTC