RE: Reliability is really two-phase (was RE: Reliable Web Services)

Let's assume a typical and quite common scenario.

A buyer sends a message to a supplier asking to buy a product. The buyer
expects that it may take 8 hours before the supplier can indicate whether
the purchase can be processed. The seller needs to check inventory levels to
determine when the product can be shipped, update its production plan,
validate the buyer's credit, etc.

This is usually a fast process when the product is in inventory, or the
inventory is constantly replenished, and the process is entirely automatic.
It takes longer when the product has to be produced, demand exceeds
inventory, or the process is not entirely automatic (which as we all know is
quite common in the business world).

The request got lost in transit, and after eight hours the buyer does not
hear back from the supplier. Since the buyer and supplier use a coordination
protocol, they can both agree whether the product would be delivered. They
need coordination to deal with a variety of cases, such as the buyer not
aggering to the delivery date provided by the supplier, or agreeing to the
delivery date for some items but deciding to remove other items from the
purchase order.

The buyer decides to still procure the product form the seller, and issues
another purchase order. Since the buyer and supplier coordinate we get
exactly one order (the buyer has determined that the previous order did not
get through), no loss of consistency.

All we lost are eight hours.

Now, let's equip the buyer and supplier with an RM solution. The RM solution
does not attempt to determine whether the order will be processed, when
delivery will occur, etc. All it cares about is getting the request to the
supplier.

The RM expects to hear an ack after 30 minutes. Since no ack has been
received, the RM tries to resend the message and the second message makes it
to the supplier and the ack is recieved by the buyer's RM.

Due to the unreliability of the transport the supplier has lost 30 minutes
for processing the request, but is still able to respond to the buyer before
eight hours have passed. The buyer does not have to attempt and resolve the
situation after eight hours has passed, saving resources for both buyer and
supplier and expediting the delivery of the product and any other process
that depends on the delivery date being known. (For example, because the
buyer is also a supplier and has to report back to its buyers)

Would you say that RM has some added value?

arkin


> -----Original Message-----
> From: www-ws-arch-request@w3.org [mailto:www-ws-arch-request@w3.org]On
> Behalf Of Peter Furniss
> Sent: Saturday, December 21, 2002 5:39 PM
> To: Patil, Sanjaykumar
> Cc: Www-Ws-Arch
> Subject: RE: Reliability is really two-phase (was RE: Reliable Web
> Services)
>
>
>
> Sanjay replied directly to me, but his comments are worth
> stirring into the
> public
> pot (and he's ok with that). My comments interspersed:
>
> > -----Original Message-----
> > From: Patil, Sanjaykumar [mailto:sanjay.patil@iona.com]
> > Sent: 21 December 2002 02:32
> > To: Peter Furniss
> > Subject: RE: Reliability is really two-phase (was RE: Reliable Web
> > Services)
> >
> >
> >
> > Peter, would it be correct to say that - If somebody wanted to
> > deploy BTP entirely for achieving RM today, it should be
> > possible. Perhaps, this may not be the best use of BTP, since the
> > state alignment problems solved by RM is more of infrastructrural
> > in nature, where as BTP, AFAIK, is primarily intended for
> > business state alignment. Therefore could I say that -
> > a> The use of BTP for business state alignment makes low level
> > state alignment and therefore RM unnecessary
> > b> BTP technology is neutral to the nature of state alignment and
> > therefore could be deployed for achieving purely the goals of RM
> > c> The BTP machinery is similar (superset!) to a typical RM
> > solution and therefore does not introduce huge overheads for
> > maintaining its flexibility (extensibility!) in supporting
> > additional coordination functionalities.
>
> yes, that is exactly what I meant. BTP does not directly know
> what "prepared" means, so it could just mean "it is safely here".
>
> > I guess, many of us think that solving RM  is practically a
> > "must", where as solving business level coordination in an
> > efficient manner is still perceived as "future" (in spite of the
> > smart work you guys did in BTP :-). Therefore, the argument of
> > "BTP making RM unnecessary" to me is like selling cake when bread
> > is in high demand. However, if my understanding as above is
> > correct (i.e. BTP can solve RM today and if needed other
> > coordination problems tomorrow), perhaps RM is the best launching
> > pad for BTP.
>
> but if cake is as cheap as bread ...   :-)
>
> (cheapness might not be price exactly - manageability, availability
> might be more significant)
>
> > Just a thought. May be I got the whole thing completely wrong, in
> > which case please pardon me for taking your precious time.
>
>
> >
> > Have a good weekend.
> >
> > thanks,
> > sanjay
> >
> >
> > -----Original Message-----
> > From: Peter Furniss [mailto:peter.furniss@choreology.com]
> > Sent: Friday, December 20, 2002 3:56 AM
> > To: Ricky Ho; www-ws-arch@w3.org
> > Subject: RE: Reliability is really two-phase (was RE: Reliable Web
> > Services)
> >
> >
> >
> > Ricky Ho replied to me:
> >
> > > Are you implying at point (j) that by using BTP, reliable
> > > messaging is not
> > > necessary ?  I think they are solving orthogonal problem.  In
> fact, BTP
> > > without reliable messaging is not sufficient for conducting high money
> > > value transaction in a reliable manner.
> >
> > Yes, I don't think RM is necessary with BTP. The BTP exchange means that
> > the application work (e.g. money transfer) won't happen unless
> both sides
> > agree that they understand and want to do it. If the pattern follows the
> > typical sequence:
> >
> > 	client requests transfer
> > 	server says it can do it, iff the client confirms
> > 	client confirms
> > 	server applies confirmation, and tells the client it is done
> >
> > then you have a stronger mechanism than RM, which is concerned only
> > with being a reliable postman.  (admittedly, if you map things in a
> > particular way, the two end up becoming fairly close - certainly if the
> > detailed application behaviour is fixed assuming an RM pattern, BTP
> > can carry the identical semantics - though it has some extra
> > flexibilities that RM would have difficulty with).
> >
> > Peter
> >
> >
> > >
> > > Rgds, Ricky
> > >
> > >
> > > At 02:16 AM 12/18/2002 +0000, Peter Furniss wrote:
> > >
> > >
> > > >The reliability requirement really means that you need
> > > >the sort of mechanisms and exchanges of two-phase outcome
> > > >(as in OASIS BTP).  "reliable messaging", depending on the
> > > >details of its mechanisms, is variously giving less that it
> > > >seems, or is just as complicated (and, in some cases, both).
> > > >
> > > >
> > > >To expand that assertion a bit:
> > > >
> > > >a) i'm assuming reliability can be defined as two parties
> > needing to have
> > > >a consistent view as to whether some work has or has not been done
> > > >by one of them at the request of the other
> > > >   [ this is the 0 or 1 case, and is the centre of state alignment -
> > > >   where I change my view of the shared state because I know you
> > > have/will]
> > > >
> > > >
> > > >b) the critical feature is that one side accepts
> > > >that the other side will make the definitive determination as
> > > >to whether the work is to be done; the deferring side
> > > >agrees to accept/apply/follow that determination once it knows of it
> > > >
> > > >  [ which is the essence of the solution to the two armies
> > > problem - their
> > > >problem was that neither side will make an unconditional
> decision, but
> > > >wants the other side to make an irrevocable decision as a
> condition of
> > > >its own]
> > > >
> > > >c) once the determination has been made, the repetition and recovery
> > > >rules of the transaction protocol make sure the other side will
> > > >know eventually
> > > >
> > > >d) you normally want to know that the application has really done
> > > >the work. In some cases, it may be sufficient to know that
> > > >the work will eventually be done (e.g. it's been dropped on a
> > > >reliable queue) - but that means that either there is no
> > > >comeback or any comeback is a whole new activity.
> > > >
> > > >e) the "simple" ack approach actually requires some extra
> > > >messages to avoid one or both sides having to remember the
> > > >request (or some identification on it) indefinitely or have
> > > >a complicated set of timeout rules as to when they can forget
> > > >things. (and that's before we worry about surviving crashes)
> > > >
> > > >f) reliable messaging (including things like HTTPR) are
> > > >distinguished from two-phase outcome only by what is counted
> > > >as the "decision" - it's "message received", not "work is/will
> > be done".
> > > >The systems have to store similar information/identifiers
> > > >and follow similar rules as to when to persist and
> > > >delete this information. [ in other words, it's not really simpler
> > > >to just use reliable messaging ]
> > > >
> > > >g) some of the scenarios differ from the classic
> > > >two-phase commit exchanges in that the sender of the first
> > > >message is the one that defers to the other side's decision.
> > > >(classic two-phase is client asks server to defer to the
> > > >client's decision). This has some impact on how the
> > > >relationship gets established, but doesn't significantly
> > > >affect what happens later (in terms of retries, persistence,
> > > >recovery sequences).
> > > >
> > > >h) expel from your mind any assumptions about how the party
> > > >that is waiting on the other's determination/decision is
> > > >holding itself able to obey. (two-phase commit does *not*
> > > >imply two-phase locking). It may hold the information in
> > > >a distinguished interim state (outbound buffer, uncleared funds,
> > > >marked as reserved). It may completely perform its work and
> > > >retain a means of un-performing it. It may just check it could
> > > >perform its work and remember what it must do.
> > > >
> > > >i) the transaction mechanisms actually allow for more complex
> > > >arrangements - the coordination role can be distinguished from
> > > >the resource-holding parties on each side, and there can be
> > > >more than two such parties. But for comparison with reliable
> > > >messaging, we can consider all the roles to be on one side or
> > > >the other, and consider only a single bilateral relationship.
> > > >
> > > >j) using a loosely-coupled transaction mechanism like BTP means
> > > >the application code doesn't have to get tangled up in the recovery,
> > > >repeats etc. Setting of timeouts and the like becomes a
> > > >configuration question (possibly even a dynamic configuration
> > > >question if you really want to).
> > > >
> > > >k) a two-phase outcome exchange doesn't really seem to count as
> > > >"orchestration" or "choreography" as I understand those. It's
> > > >just a matter "please do this", "I can do this", "I can't do
> this" etc.
> > > >Any compensation/counter-operation/reversal is delegated to the
> > > >party that has to do the reversal, rather than having to be
> > > >explicitly exposed as a counter-operation distinctly accessed
> > > >by the other side.
> > > >
> > > >
> > > >That's enough for now - I'm probably still obscure through
> > > >brevity, but the message is long enough already.
> > > >
> > > >Peter
> > > >
> > > >------------------------------------------
> > > >Peter Furniss
> > > >Chief Scientist, Choreology Ltd
> > > >
> > > >    Cohesions 1.0 (TM)
> > > >    Business transaction management software for application
> > coordination
> > > >
> > > >web: http://www.choreology.com
> > > >email:  peter.furniss@choreology.com
> > > >phone:  +44 20 7670 1679
> > > >direct: +44 20 7670 1783
> > > >mobile: +44 7951 536168
> > > >13 Austin Friars, London EC2N 2JX
> > >
> >
>

Received on Sunday, 22 December 2002 00:41:59 UTC